Niceboy PARTY BOSS, Руководство пользователя

Страница: 17 / 64

17
USB MODE
1. After inserting the USB device into the USB slot (12), the speaker will automatically switch
to the appropriate mode. This is indicated on the display by the word USB.
2. To start or pause a track, briefly press the PLAY button (15).
You can control the volume with the VOLUME knob (18) on the upper panel. Briefly press
the NEXT (16) and PREV (17) buttons to skip to the next or previous track.
The device supports data storage devices with a maximum capacity of 32GB and MP3 and
WAV audio formats. The USB socket can also be used as an output power supply. In such a
case, the speaker acts as a power bank.
SD CARD MODE
1. 13. After inserting the SD card, the speaker will automatically switch to the appropriate
mode. This is indicated on the display by the word SD.
2. To start or pause a track, briefly press the PLAY button (15).
You can control the volume with the VOLUME knob (18) on the upper panel. Briefly press
the NEXT (16) and PREV (17) buttons to skip to the next or previous track.
The device supports data storage devices with a maximum capacity of 32GB and MP3 and
WAV audio formats.
FM RADIO MODE
Place the speaker in an open area so that the radio signal strength is sufficient.
The speaker is equipped with an integrated antenna.
1. Briefly press the MODE button (14) to find the FM radio mode. This is indicated on the
display by the FM station number, for example, 90.3.
2. Briefly press the PLAY button (15) to start scanning for the available stations. The device
automatically stores the discovered stations in preset channels.
3. When the scanning is finished, you can switch between FM stations with the NEXT (16) and
PREV (17) buttons, or with the number buttons on the remote control.
EQUALIZER
The speaker has two basic equalizer settings, which you can switch between with the MEGA-
BASS button (4). To customize this function, briefly press the MENU / LED button (3) to find L
(bass) and H (treble) on the display. Use the NEXT (16) and PREV (17) buttons to set the values
from -8 to 8.
WIRELESS MICROPHONE
Unscrew the bottom cover of the microphone and insert the supplied AA batteries. Screw on
the cover again and turn the microphone back on by using the switch on top. The microphone
automatically connects with the speaker, provided the speaker is on. To adjust the micropho-
ne volume and echo effect, briefly press the MENU / LED button (3) to find N (volume) and E
(echo) on the display. Use the NEXT (16) and PREV (17) buttons to set the values from 0 to 10
for volume and 0 to 12 for echo.