Niceboy PARTY BOSS, Руководство пользователя

Страница: 16 / 64

16
REMOTE CONTROLLER
Before using the controller, open the bottom cover and insert the supplied AAA batteries.
1. BT - Switches the speaker to Bluetooth mode.
2. MENU - Press this button to adjust the bass, treble, micro-
phone volume and echo effects. Use the „+“ and „-“ buttons
to set the values.
3. VOL- - Reduces the volume.
4. CH- - Plays the previous track in Bluetooth, USB or SD
mode. In FM mode, go to the previous station.
5. REPEAT - Repeats a track on a USB or SD card.
6. LIGHT - Turn on / off the illumination effects.
7. NUMBER BUTTONS - In USB and SD modes, press any key
from 0 to 9 to directly select the tracks you want to play. In
FM mode, this allows you to enter frequencies manually.
8. Power - Turns the speaker on and off.
9. Mute - Turns the speaker sound on and off.
10. EQ - Switches between preset equalizer values.
11. SCAN - In FM mode, automatically searches for and stores
available stations from the lowest to the highest frequency.
12. VOL+ - Increases the volume.
13. CH+ - Plays the next track in Bluetooth, USB or SD mode. In
FM mode, go to the next station.
14. PLAY - Plays or pauses the track in Bluetooth, USB or SD
mode.
15. TUNER - Switches the speaker to FM radio mode.
16. USB / SD - Switches the speaker to USB or SD card mode.
17. AUX - Switches the speaker to AUX mode.
BLUETOOTH MODE
1. The speaker is by default in Bluetooth mode after being switched on. If the speaker is in
another mode, it is necessary to actívate the Bluetooth mode by briefly pressing the MODE
button. The Bluetooth pairing mode is indicated on the display by a flashing word BLUE.
2. Activate Bluetooth on your device. Select “Niceboy PARTY Boss 200W” in the list of available
devices.
3. The device will connect to the loudspeaker. A successful pairing is announced by an acous-
tic prompt and the word BLUE is permanently lit on the display.
4. After switching it on again, the speaker automatically connects to the last paired device.
AUX MODE
1. The speaker must be turned off.
2. Insert the included 3.5mm jack cable into the INPUT audio input (11).
3. Switch the speaker on and then briefly the MODE button (14) to switch to AUX mode.
4. AUX mode is indicated on the display by LINE.
5. Use the device to which you have connected the loudspeaker to control the music being
played.
You can control the speaker volume with the VOLUME knob (18) on the top panel.
1
2
4
3
6
5
7
8 9
15
10
16
11
14
13
12
17