How to connect IP video cameras
Smartphone pairing
Up to 4 IP video cameras can be connected to the control unit,
through the domestic Wi-Fi network (only control units connected
in Client mode).
Access the Device programming menu - IP video cameras
Enter the user name and password of the IP video camera, the AD-
DRESS LINK and the MAC ADDRESS then set the reception interval
of the frames from 1 to 5 seconds and the number of frames...
Before proceeding make sure you have disabled the user in
the section
Download the MyNice World app to the smartphone
• if the control unit is connected in Client mode, ensure that the
smartphone is connected to the Wi-Fi or is nonetheless enabled to
exchange data;
• if the control unit is connected in Access Point mode, connect the
smartphone to the WLAN of the control unit.
Access the menu
Start the MyNice World app and configure the system (New
configuration)
Fill in the fields
by copying the IP address of the control unit and
the serial number.
Enter the user name exactly as it is memorised in the control
unit and the respective PIN, press Start on the control unit
and OK on the smartphone.
Wait for the pairing procedure to ter-
minate, as confirmed by an acoustic signal. To confirm the correct
pairing, the name of the user who requested the authentication will
appear on the control unit.
19
User management
ENABLE DIRECT MANAGEMENT VIA APP
Settings Menu
Smartphone Association
