Nice LFAB4000, Инструкции и предупреждения по установке и использованию

Страница: 13 / 16

English –
11
10
TECHNICAL SPECIFICATIONS
All technical specifications stated in this section refer to an ambient temperature of 20°C (± 5°C). • Nice S.p.A. reserves the right to apply
modifications to products at any time when deemed necessary, while maintaining the same intended use and functionality.
XLFAB5024 LFAB4024 LFAB4024HS LFAB4000
Type Electro-mechanical dear motors for gates and doors with hinged panels
Power input
24 V 24 V 24 V 230 V
Peak absorption 7 A 5 A 7 A 1,5 A
Maximum absorption 2 A 1,5 A 4 A 1 A
Peak power 170 W 120 W 170 W 340 W
Maximum power 50 W 36 W 96 W 180 W
Capacitor incorporated – 7μF
Protection rating IP 67
Run from 0° to 110° or 360°
Idle speed 0,8 rpm 1 rpm (1,25 rpm * ) 3 rpm 0,85 rpm
Speed at nominal torque 0,65 rpm 0,85 rpm 2,4 rpm 0,65 rpm
Maximum torque 400 Nm 300 Nm 200 Nm 500 Nm
Nominal torque 100 Nm 75 Nm 90 Nm 125 Nm
Functioning temperature -20 °C ... +55 °C
Cycles/hour at the nominal
torque
45 60 50 20
Duration Estimated between about 100.000 and 250,000 manoeuvre cycles, according to the conditions given in Table 1
Dimensions 230 mm x 206 mm x h 88 mm 375 mm x 225 mm x h 110 mm
Weight
15 kg (gear motor with
foundation space)
12,5 kg 12,5 kg 14,3 kg
( * ) - Value refers to a power supply voltage of 30 V.
9
PRODUCT DURATION
The duration and average economic life of the product. The value of
duration is strongly affected by the fatigue index of the manoeuvres
performed by the automation: i.e. the sum of all factors that contribute
to wear of the product (see Table 1).
The estimation of duration is made on the basis of the design calcula-
tions and the test results performed on prototypes. In fact, as it is an
estimate, it does not represent any guarantee regarding the effective
duration of the product.
To establish the probable duration of your automation, proceed as
follows:
01. Calculate the fatigue index by adding the percentage values of the
items present in
Table 1
.
02.
In
Graph A
of the value just found, trace a vertical line that crosses
the curve; from this point trace a horizontal line until the “manoeu -
vre cycles” line is crossed. The value determined is the estimated
duration of your product.
Example of the duration calculation of an LFAB(...) / XLFAB(...)
gear motor. Refer to Table 1 and Graph A:
1)
- Panel length: 3 m
2)
- Panel weight: 500 kg = fatigue index: 30%
3)
- Installation in windy areas = fatigue index: 15%
4) - Does not have other elements of fatigue
Total fatigue index = 45%
Estimated duration = 110.000 manoeuvre cycles
50.000
100.000
150.000
200.000
250.000
GRAPH A
manoeuvre cycles
fatigue index %
TABLE 1
Length of the panel
(m)
≥ 2.00 2.01 ÷ 3.00 3.01 ÷ 4.00 4.01 ÷ 5.00
Weight of the panel
(kg)
Fatigue index
≤ 150
0 % 10 % 20 % 30 %
151 ÷ 350
10 % 20 % 30 % 40 %
351 ÷ 550
20 % 30 % 40 % 50 %
551 ÷ 750
30 % 40 % 50 % –
751 ÷ 900 40 % 50 % – –
Environmental temperature exceeding 40°C or below
0°C or humidity exceeding 80%
15 %
Blind panel
20 %
Installation in windy area
15 %