Nice E EDGE XSI 0620 LDC, Инструкции и предупреждения по установке и использованию

Страница: 20 / 24

19 – English
––– GROUP “C” PROCEDURES ––
only available using a specific programmer (e.g.: TTP)
NOTES AND WARNINGS
•
To run the procedures in this group, you must use a compatible programmer (see the “Nice Screen” catalogue, also available on www.niceforyou.com).
• For the programming and adjustment procedures possible with a given programmer, see the programmer’s user manual and interface.
C
––– GROUP “D” PROCEDURES ––
done exclusively with a smartphone with NFC (Near Field Communication)
NOTES AND WARNINGS
The programming with the “NFC” technology is not yet available on this motor. For more information contact the Nice Technical Assistance.
Using a smartphone equipped with NFC technology and a software application produced by Nice (to be installed on your smartphone), you can configure the motors
before installing them, even without the need to supply power. You can also perform a hardware and software diagnostic of the motor, even if it is damaged.
D