Nice Apollo 73001K, Руководство пользователя

Страница: 11 / 32

11
Motor 1 Motor 2
Install the 5 and 3-pin connector for motor 1 into the connection
labeled “Motor 1” on the controller as shown.
For a dual gate installation install the 5 and 3-pin and connector
for motor 2 into the connection labeled “Motor 2”.
Note: (Motor 1) - Make sure motor lead connector is plugged in
below the limit 5 pin terminal connector
12 - LIMIT AND MOTOR CONNECTION TO THE BOARD
LEFT CLOSING GATE - FACTORY DEFAULT RIGHT CLOSING GATE
Limit switch wiring
Connect the 7300 cable to the 5-pin connector as shown
below.
Limit switch wiring
Connect the 7300 cable to the 5-pin connector as shown
below.
Motor wiring
Connect the motor leads to the 3-pin connector as shown
below. Note: If the gate moves in the opposite direction
from what is expected, reverse the actuator wiring from
what is shown. (Red to Pin 1, Black to Pin 3).
Motor wiring
Connect the motor leads to the 3-pin connector as shown
below.
Note: If the gate moves in the opposite direction
from what is expected, reverse the actuator wiring from
what is shown. (Red to Pin 3, Black to Pin 1).
1
2
3
4
5
7300
Limit wiring
White: Close limit
Orange: Open Limit
Green: Limit Common
Green
Orange
White
1
2
3
4
5
7300
Limit wiring
White: Close limit
Orange: Open Limit
Green: Limit Common
Green
White
Orange
1
2
3
7300
Motor Leads
NOTE: If gate moves in opposite
direction from what is expected,
reverse the motor power lead wiring
Black
Red
1
2
3
7300
Motor Leads
NOTE: If gate moves in opposite
direction from what is expected,
reverse the motor power lead wiring
Red
Black
11 - LIMIT AND MOTOR WIRING