Nibe POOL 11, Руководство по установке

Страница: 18 / 52

16 POOL 11
GB
Pipe connection FIGHTER 1240/1250
General
When Fighter 1240/1250 is docked to pool, the heat-
ing circuits must be supplied with an external circula-
tion pump. This is because, during pool charging, the
heat pump’s internal circulation pump maintains a flow
through the pool heat exchanger and the extra/external
circulation pump (P8) maintains a flow in the heating cir-
cuits. The external circulation pump is connected to relay
12 (extra relay card), and it circulates the heating medi-
um in the heating system during the “Spring/Autumn”
and “Auto(winter)” operating modes.
Sensor placement
The flow line sensor must be repositioned from inside
the heat pump to out on the heating circuit.
The flow line sensor
X4:15-16.
The pool sensor X1:12-13.
Conditions for pool charging
If the pool sensor is not connected, pool charging is not
permitted to start.
Heating the pool is prioritised after hot water charging
and heating. Consequently, pool charging only starts
when there is no heating or hot water demand. When
pool charging has started, it runs for at least the time
set in menu 8.4.3. If there is heat demand or hot water
demand after the time set in menu 8.4.3, pool charging
stops. If extra hot water is activated during pool charg-
ing, pool charging stops.
Outline diagram FIGHTER 1240/1250 with POOL 11
P oo l
63
49
89
35.1
19.2
A B
A B
Pool
A B
FG
BV
15
5 2
8 5
14
13 3 12
4
63
44
44
44
44
52
84
85
52
81
96
T
T
Pool
T
UG
NK
AV
AV
AV
VXV
SF
SF2
SF
BK/JK
SÄV
SÄV
EXP
RV
CP2
CP1
PG
VX
AB
CP
GT16
SV4
P8
GT11
Note! This is an outline diagram.
Actual installations must be planned
according to applicable standards.