53
Measure the height on the rear panel at which a hole must
be made to connect the stove to the chimney. Cut away
one or more of the panels in the telescopic mantle as
required and hang the rear panel over the connecting flue.
Then connect the stove to the chimney as described in the
section headed “High-level elbow-joint flue connection”.
Screw the threaded pins into the upper flange of the chimney mantle. Then attach the sealing plate and lay the insulation
in place as shown. The sealing plate and insulation are not used when connecting to a rear flue directly from the rear of the
stove, nor when connecting to a top flue through the ceiling using the Premodul chimney system.
The telescopic mantle can be used with all types of flue
connections described earlier in these instructions. The
procedure below describes installation together with a high-
level elbow joint flue connection.
Installing a telescopic chimney mantle
Mutter M6
Gängad stång
Pannkitt
Pannkitt
GB
Heat-resistant sealant
Heat-resistant sealant
Nut M6
Threaded pin
