Nibe ERS 10-400, Руководство по установке

Страница: 17 / 28

Program setting of ERS 10 can be performed via the
start guide or directly in the menu system in the main
product.
Caution
See the documentation for the main product.
Start guide
The start guide appears upon first start-up after heat
pump installation, but is also found in menu 5.7.
Menu system
If you do not make all settings via the start guide or need
to change any of the settings, this can be done in the
menu system.
MENU 5.2.4 -SYSTEM SETTINGS
Activating/deactivating of accessories.
Activate: "exhaust/supply air module".
MENU 5.3.12 - EXHAUST/SUPPLY AIR
MODULE
Settings specific to ERS 10.
"Lowest extract air temp.": Set the minimum extract air
temperature to prevent the heat exchanger freezing.
The supply air fan speed reduces if the extract air tem-
perature at (BT21) is lower than the set value.
"Bypass at excess temperature": If a room sensor is in-
stalled, set the over-temperature at which the bypass
damper (QN37) must open here.
"Months btwn filter alarms": Set how often the filter
alarm must be displayed.
TIP
When ERS 10 is activated, the other ventilation
menus will also light up.
17 Chapter 7 | Program settings NIBE ERS 10-400
7 Program settings