NI CB-2162 User Guide
2
ni.com
What You Need to Get Started
To set up and use the NI CB-2162, you need the following items:
❑
NI SHC68-C68-D2 or NI C68-C68-D4 cable assembly
❑
Compatible NI digital waveform generator/analyzer module installed
in a PXI chassis, compact PCI chassis, or desktop PC
You also may need the following optional items:
❑
Resistors and 10-pin single-inline packaged resistor networks for
pull-up/pull-down and series termination
❑
The NI CB-2162 ships populated with a 0
Ω
resistor. A 50
Ω
resistor
also is included for optional STROBE/PFI 5 series termination.
❑
30-gauge wire
❑
Wire-wrap tool
❑
1 × 2 header receptacle(s)
❑
DC power supply for the prototyping area
❑
CA-1000 (NI part number 777664-01), rack-mount side panels
(NI part number 777665-01), and an NI CB-2162 CA-1000 mounting
kit for mounting the NI CB-2162 in an enclosure
❑
The documentation included with the digital waveform
generator/analyzer module and the driver software included with your
NI device
