NI CB-2162 User Guide
6
ni.com
Caution
Before
attaching any cables or accessories, install the digital waveform
generator/analyzer. Refer to the Getting Started Guide that shipped with your device for
instructions on installing the module.
2.
Attach either end of the cable assembly to the DDC connector of the
digital waveform generator/analyzer module and secure the cable with
the captive screws on the cable connector.
3.
Attach the other end of the cable assembly to the DDC connector of the
NI CB-2162 and secure them together with the captive screws on the
cable connector.
Connecting Signals
Each DIO, PFI, and clock channel of the digital waveform
generator/analyzer connects to a corresponding pin on the NI CB-2162.
Refer to Figure 1 for the location of these pins on the NI CB-2162.
Caution
Before
powering down the digital waveform generator/analyzer module, remove
power from the prototyping area of the NI CB-2162. NI is
not
liable for any damage
resulting from improper signal connections.
