©
National Instruments Corporation
3
NI-FBUS Installation Guide for Windows 2000/XP
Figure 1.
Inserting the PCMCIA-FBUS
3.
Connect the PCMCIA-FBUS to the Fieldbus network.
Your kit contains one PCMCIA-FBUS cable. Refer to Appendix B,
Pinout Information
, of the
Getting Started with Your PCMCIA-FBUS
and the NI-FBUS Software
manual if you need to make a longer cable
than the PCMCIA-FBUS cable provided.
Note
Although very similar, the installation processes for Windows 2000 and
Windows XP differ slightly. Where those differences occur in the following, you see
the step for your operating system labeled as either
Windows 2000
or
Windows XP
.
4.
Power on your computer.
5.
In
Windows 2000
,
the
Found New Hardware
wizard appears.
Click
Next
to continue.
In
Windows XP
,
a slightly different screen appears. Click the selection
Install from a list or specific location (Advanced)
then click
Next
to
continue.
1
Portable Computer
2
PCMCIA Socket
3
PCMCIA-FBUS Cable
1
2
3
