manualshive.com logo in svg

NI 7935R, Руководство по началу работы, Страница: 12 / 18

Поделиться
Скачать
NI 7935R Скачать руководство пользователя страница 12

Programming with LabVIEW

The Controller for FlexRIO examples provide a starting point for programming with
LabVIEW. To access these examples, open LabVIEW and select 

Help

»

Find Examples

»

Hardware Input and Output

»

Controller for FlexRIO

.

For more detailed instructions about programming the NI-7935R with LabVIEW, refer to the

NI-7931R/7932R/7935R User Manual

.

Related Information

FlexRIO Documentation

 on page 2

Text-based Programming

You can target the NI-7935R Linux Real-Time operating system from text-based development
environments such as C and C++.

Related Information

For more information about text-based programming, refer to the Getting Started with C/C++
Development Tools for NI Linux Real-Time, Eclipse Edition tutorial.

Removing the Adapter Module

Complete the following steps to remove an adapter module from the NI-7935R.
1.

Disconnect all cables to the adapter module.

2.

Power off the NI-7935R.

2

3.

Unscrew the adapter module.

4.

Remove the adapter module.

Troubleshooting the NI-7935R

Related Information

Connecting the NI-7935R to the Host Computer

 on page 8

Why Can't the NI-7935R Communicate with the
Network?

1.

Connect cables from your device to the host computer.
a)

If you are using the USB port, use a USB cable to connect the NI-7935R USB
device port to a host computer.

The USB driver creates a virtual network interface and assigns an IP address to the
NI-7935R in the format of 172.22.11.

x

.

2

If you cannot power down the NI-7935R, use the System Configuration application programming
interface (API) to disable power to the adapter module.

12

  | 

ni.com

  | 

NI-7935R Getting Started Guide

Содержание 7935R



















Отзывы:

Нет отзывов