manualshive.com logo in svg

NI 7935R, Руководство по началу работы, Страница: 2 / 18

Поделиться
Скачать
NI 7935R Скачать руководство пользователя страница 2

Connecting the NI-7935R to the Host Computer......................................................................8
Installing the FlexRIO Adapter Module................................................................................... 8
Configuring the System in Measurement & Automation Explorer (MAX)............................. 9

Setting a System Password............................................................................................. 10

Installing Software on the NI-7935R...................................................................................... 10
Adding the NI-7935R to a LabVIEW Project.........................................................................11

Adding a FlexRIO Adapter Module to the Target...........................................................11

Programming Options............................................................................................................. 11

Programming with LabVIEW.........................................................................................12
Text-based Programming................................................................................................ 12

Removing the Adapter Module...............................................................................................12
Troubleshooting the NI-7935R............................................................................................... 12

Why Can't the NI-7935R Communicate with the Network?.......................................... 12
Why Doesn't the Device Appear in MAX?.....................................................................13

Appendix: Front Panel............................................................................................................ 13

NI-7935R Front Panel.....................................................................................................13

Worldwide Support and Services............................................................................................ 16
Where to Go Next................................................................................................................... 16

FlexRIO Documentation

Table 1.

 FlexRIO Documentation Locations and Descriptions

Document

Location

Description

 

 

 

Getting started guide
for your controller for
FlexRIO

Available from the Start menu
and at 

ni.com/manuals

.

Contains installation instructions
for your FlexRIO system.

Specifications
document for your
controller for
FlexRIO

Available from the Start menu
and at 

ni.com/manuals

.

Contains specifications for your
controller for FlexRIO.

Getting started guide
for your adapter
module

Available from the Start menu
and at 

ni.com/manuals

.

Contains signal information,
examples, and CLIP details for
your adapter module.

Specifications
document for your
adapter module

Available from the Start menu
and at 

ni.com/manuals

.

Contains specifications for your
adapter module.

LabVIEW FPGA
Module Help

Embedded in 

LabVIEW Help

and at 

ni.com/manuals

.

Contains information about the
basic functionality of the
LabVIEW FPGA Module.

2

  | 

ni.com

  | 

NI-7935R Getting Started Guide

Содержание 7935R



















Отзывы:

Нет отзывов