NI Climbing Frames Titanic, Инструкция по эксплуатации

Страница: 36 / 44

Step 24: Pirate Ship Assembly Step 5
•
Using the remaining 1460mm 3” x 1.5” to make two benches, one on each side of the ship
•
This can be done in a number of different ways. For each bench you will need roughly 3
pieces of timber for the seat, 6 pieces for the vertical supports (3 at each end), and 2 pieces
(1 at each end) to connect the vertical supports to the horizontal pieces of timber for the
seats. Ensure the legs of the bench sit flush on the ground
•
Secure the 3” x 1.5” together using decking screws and use the 40mm screws to secure the
3” x 1.5” to the enclosed bottom or the tongue and groove of the ship