Installation and User Guide of Board
Ideas of Interaction
9
Please make sure that to install and use the NHBoard interactive whiteboards indoor and do not pour or
spray any alkaline liquids directly onto the interactive whiteboard or any of its sub-components. These
liquids might get into areas where they could damage resistive electronic components.
Keep Away from Dust and Scratching
NHBoard interactive whiteboards are for use in office and classroom environments and are not for industrial
use where heavy dust and pollutants can cause malfunctions or impaired operation.
Electrostatic Discharge (ESD)
NHBoard interactive whiteboards meet the requirements of EN61000-4-2 severity level 4 for direct and
indirect ESD. No malfunction or damage up to 15kV (both polarities) with a 330 ohm, 150 pF probe (air
discharge). Un-mated connectors meet 8kV for direct (contact) discharge.
Wall-Mounting Instruction
To avoid crash and friction, two persons are needed to install the interactive whiteboard.
Don’t leave cables on the floor in case of stumble. If the cables can only be left on the floor, users have to
straighten them, wrap them with warning insulating tape or fix them.
The following procedures illustrate the mounting of the NHBoard interactive whiteboards onto a wall.
Accessories for Wall-Mounting procedures
Name
Quantity
Picture
1
L-shaped metal bracket-right side
1
2
L-shaped metal bracket-left side
1
3
Expansion bolt
2
4
Swell plug
2
5
Self-tapping screw
2
There are four sets of foams on the four sides
of whiteboard, the foams contain corner
protection foams and cover foams. Users will
find the product’s Installation and User
Manual, USB Cable, Whiteboard Pens,
Warranty Card, Software CD, Expansion
Bolts, Inner Hex Head Screwdriver in one of
the corner protection foams. Certainly, two
sides (up-down) foam have been designed to
make a maximum protection from any
unexpected impact or friction during the
transportation process.
