NFT BusView Скачать руководство пользователя страница 5

INSTALLING AND MOUNTING THE GPS UNIT 

The best location for a stealth installation is beneath the top of the dash behind, 
above or next to the instrument cluster. The GPS and GSM antennas are 
internally located within the GPS unit. The unit must be mounted with the label 
facing the sky. The GPS antenna is located under this label. The GPS unit will 
work best if it has a clear view of the sky and as much of the horizon as possible 
with no metal between it and the sky. Any metallic objects between the GPS unit 
and the satellites will degrade the signal and reduce the overall performance. Try 
to keep the device at least 12 inches away from audio devices such as vehicle 
radio and speakers. 
 

WARNING 

The body of the car or any other metal structure can affect the

 

accuracy of the GPS signals and prevent normal operation. Location of the

 

GPS unit is critical to the operation.

 

 
The GPS unit can be installed in any type of vehicle. The unit should be mounted 
so it will not be exposed to damage from people or objects. The GPS unit has tie 
strap grips, use nylon tie straps to firmly mount the GPS unit. 

 
 

Confidential

Page 5

3/6/2020 

Содержание BusView













Отзывы: