
Items Needed for BusView Installation
Qty
Items
Photo
2
Fuse Taps
If your bus uses blade style fuses
these make installation very easy.
The size needed depends on the
bus model.
1 - 3
Ring Terminals
If your model bus does not use
blade fuses you will need 3
otherwise you will only use this for
the ground
1
Inline Splice
This is used for tying into the
warning light master.
8-inches
Small Heat Shrink Tubes
This is used for making the
connections to the scanner, there
are 4 wires (20 AWG) and you need
approximately 2 inches per wire.
Confidential
Page 12
3/6/2020