NF WF1973, Инструкция по эксплуатации

Страница: 14 / 169

4
MULTIFUNCTION GENERATOR
2.
PREPARATIONS BEFORE USE
2.1 Checking Before Use
a) Safety check
To ensure safety in using the WF1973/WF1974, the user should read the following sections
of this instruction manual before using the WF1973/WF1974:
• Safety Precautions
(provided at the beginning of this instruction manual)
• 2.3 Grounding and Power Supply Connection
b) Appearance and accessories check
If an abnormality (such as a flaw or dent) is found on the outside surface of the corrugated
box, carefully check if the product is adversely affected when removing the product from the
corrugated box.
After opening the corrugated box, check the items contained in the box.
If an abnormality such as a flaw or dent is found on the product, or an accessory is missing,
contact NF Corporation or its representative.
• Appearance check
Check that no abnormalities such as a flaw and dent are found on the panel, controls,
connectors, and so forth.
• Configuration and accessory check
The accessories of this product are listed below. Check that there are no missing items
and no flaws are found.
WARNING
This product contains high-voltage parts. Never remove the cover.
All internal inspections of this product are to be performed only by service
technicians qualified by NF Corporation.
Main unit................................................................................................................. 1
Instruction Manual (Basics)................................................................................... 1
CD (PDF instruction manuals, application software) .......................................... 1
PDF instruction manuals:
Basics, Application, Remote Control,
Arbitrary Waveform Editing Software, Sequence Editing Software,
LabVIEW Driver
Application software:
Arbitrary Waveform Editing Software, Sequence Editing Software,
LabVIEW Driver
Power cord set (2 m, with 3-prong plug)................................................................ 1