Nexxt Solutions - ACRUX - Wireless N Gigabit Router
12
1.4.2 Rear panel
The router’s LEDs and the WPS button are located
on the front panel. (Viewed from left to right).
Note:
After a device is successfully added to the network
by WPS function, the WPS LED will remain
illuminated for about 5 minutes before going off.
Table 1-1 LEDs description
Figure 1-2 Rear Panel sketch
Name
Power
Off
On
On
Flashing
Off
Off
Flashing
Off
Power is off
Power is on
Router is initializing or there may be a system error
Router is working properly
Router has a system error
The wireless function is disabled
The wireless function is enabled
There is no device linked to the corresponding port
There is a device linked to the corresponding port,
but no activity is detected
On
A wireless device has been successfully added to the
network by WPS function
On
A wireless device failed to be added to the network
by WPS function
Quick Flash
Flashing
Slow Flash
There is an active device linked to the corresponding port
A wireless device is connecting to the network by WPS function.
This process will takes 2 minutes to complete
System
WLAN
WAN,
LAN 1-4
WPS
Status
Indication
Содержание Acrux3000
Страница 1: ......
