Nexxt Acrux3000, Руководство пользователя

Страница: 35 / 70

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
35
MAC Address - The physical address of the router,
as seen from the LAN. This value cannot be changed.
IP Address - Enter the IP address of your router or
reset it in dotted-decimal notation (factory default:
192.168.0.1).
Subnet Mask - An address code that determines the
size of the network. Normally, use 255.255.255.0
as the subnet mask.
Note:
4.5.2 WAN
Go to “ Network WAN ” in the menu, in order to
configure the IP parameters of the WAN on the
screen, as shown below.
If you change the IP Address of the LAN, you
must use the new IP Address to login to the
router.
If the new LAN IP Address you set is not in the
same subnet, the IP Address pool of the DHCP
server will change accordingly at the same time
while the Virtual Server and DMZ Host will not
take effect until they are re-configured.
If your ISP provides the DHCP service, please
select Dynamic IP, so that the Router will
automatically get IP parameters from your ISP.
The page that pops up at this stage looks like the
one below (Figure 4-6):
a.
*
*
*
1.
b.