Nexus 21 L-27i, Руководство по установке

Страница: 17 / 24

17
Step 14a: Hold your lid piece (your ceiling cut-out piece) up to the Lid Plate (part #5), which you have already installed on
the lift. The Lid Plate has 2 holes that are used to attach your lid piece. Mark the position of the holes on your lid piece.
Drill two holes ½” deep using a 3/8” drill bit in the marked positions.
Step 14b:
Using a flat head screw driver, drive the Brass Inserts (Part #25) into the ½” deep holes. Make sure to drive the
Brass Inserts into your lid material, so they are flush with the lid material.
Step 15a:
Screw the (2) Threaded Studs (Part#23) into each Brass Insert , until they are fully seated.