Nexus 21 L-27i, Руководство по установке

Страница: 11 / 24

11
Step 9a: Attach the Screen Back Plate (Part #6) to the Screen Support Bracket (Part #4). Using (4) 3/8-16 x ¾” BHMS
attached the Screen Back Plate to center of the Screen Support Bracket . NOTE: Make sure the bent tabs on the Screen
Back Plate are on the top.
Step 9b:
Place two Wire Clips to the inside wall of the
Screen Support Bracket. Place one Wire Clip just below
the upper set of PEM nuts. Place the second Wire Clip
towards the top of the Screen Support Bracket.
Step 10: Attach the Screen Support Bracket (Part #4) to the Lift Column (Part #1). Using (4) 6mm x 16mm BHMS attached
the Screen Support Bracket to the bottom of the Lift Column using the four outer most holes on the Screen Support
Bracket. NOTE: Make sure to run the Motor Cable through the Wire Clips installed in the previous step to ensure proper
cable management of the Motor Cable.