Nexus 21 L-27i, Руководство по установке

Страница: 10 / 24

10
Step 6: Attach the Lift Column to the Base Mount . Place
the Lift Column (Part #1) with the Bayonet Bracket (Part #3)
attached against the back wall of the enclosure. Using the
provided small
4mm Allen Wrench drive the (4) 6mm x
40mm FHMS Screws into the top of the lift column.
NOTE: The end of the Lift Column with the “pig-tail” is the
bottom of the Lift Column.
Step 7: Using a level, make sure the Lift Column is level and parallel with side panels of the enclosure. Using (4) #10 x ¾”
THWS Screws mount the Bayonet Bracket to the back wall of the enclosure.
Step 8: Connect the Motor Cable to the pig-tail of the lift
column.