Vehicle Installation
18
Wiring Diagram
Figure 4 – Power Cable Assembly
The following DC power cable can be used:
1
5100-C5-RFM – eLutions’ Vehicle Power Harness
The following table contains the steps for installing the power cable:
1
Determine a cable routing plan which will allow you to connect the
plug end of the DC power cable to the jack labeled POWER located
on the front panel of the iR1200 modem (refer to Figure 7).
2
Locate the nearest available chassis ground mounting point and
shorten the black lead to remo ve any excess cable length.
3
Position the fuse holder as close to the battery as possible and away
from any potentially hot components.
4
Mount the fuse holder by tie wrapping it to the other cabling wires
and dress wires as necessary.
