Step 1
To protect the glass balls from damage during transit, it has not been assembled
at the factory. and will require assembly before use.
Unpack the contents of the carton. Lay the contents out on a flat surface giving
yourself room to work.
Step 2
If you found any glass balls damaged in box. There are 2 spare glass balls for
replacement.
Remove the damaged glass ball carefully. and then attach the spare glass ball in
place. (See Figure 1.)
Step 3
a) Attach 1pc of ball stem 'A' to the center of body. (See Figure 2.)
Loosen the remaining grub screw sufficiently by allen key supplied so that the
ball stem can pass fully into its socket. Insert stem fully into its socket. and then
tighten the grub screw. ensure the stem is secured in place.
b) Repeat above step, Attach 11pcs of ball stem 'A’ and 'B’ alternately to the lamp
body. ensure all stems are secured in place.
Produced in China for Next Retail Ltd.
Assembly instructions
Produced in China for Next Retail Ltd.
Assembly instructions
3
GETTING TO KNOW YOUR PRODUCT
Components supplied. Please use this guide if you require replacement parts.
Assembly Instructions
4
3
1
G4 bulb
12V 10W
6
1
Sheldon Table Lamp
350199
350199
-
2014
-
V1
Sheldon Table Lamp
350199
350199
-
2014
-
V1
2
7
5
4
3
2
8
Pcd
Description
Spec
Qty
Remark
1
Light fitting
1
2
Ball stem ‘A’
2 Chrome; 1 Clear 12
Packed in inner box
3
Ball stem ‘B’
1 Smoked;1 Clear;
1 Chrome.
11
Packed in inner box
4
G4 bulb
12V 10W
6
Packed in fixing pack
5
6
Assembly instructions
A4 x 2
1
Packed in fixing pack
6
Re-package instructions
A4 x 1
1
Packed in fixing pack
7
Allen key
M4 x L83mm
1
Packed in fixing pack
8
Spare glass ball
1 Chrome;1 Clear.
1 Chrome
2
Packed in inner box
