Produced in China for Next Retail Ltd.
Assembly instructions
Produced in China for Next Retail Ltd.
Assembly instructions
Time to assemble
About 30 minutes.
Tools required
Scissor or Knife for unpacking
Missing parts
If you are missing any fixtures and fittings for your product, please
contact our customer service team on 0333 777 8999 and they will be
happy to arrange for a replacement to be sent to you free of charge.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To View our full light fitting range please visit
www.next.co.uk
2
1
Before You Start
Warnings
For your safety, this product must be installed in accordance with local
Building Regulations. If in any doubt, or where required by the law, consult a
competent person who is registered with an electrical self-certification
scheme.
Further information is available online or from your Local Authority.
We suggest you retain these instructions for future reference.
Light fittings should be connected to a 5 amp fused circuit.
This light fitting is suitable for indoor use only. When used with the supplied
lightbulb it may be dimmed using a standard dimmer switch.
Before commencing installation, isolate the circuit to be used by removing
the fuse or circuit breaker at the consumer distribution unit.
Do's
We suggest you spend a short time reading through this leaflet before you
start.
When you are ready to start, make sure that you have the
right tools and plenty of space.
Unwrap all packaging materials and place the components
on a clean surface to protect it from damage.
Carefully check that you have all the parts before beginning assembly
Always switch off the supply before changing lightbulbs or cleaning.
Allow bulbs to cool down before handling.
Don'ts
The fitting should not be fitted to newly painted or plastered surfaces as this
may cause discolouration of the finish.
We recommend cleaning with a soft dry cloth. Do not use abrasive materials
as these will rub away the protective coating.
Number of people required to assemble
One Person who is competent with electrical wiring and installation,
however we do recommend that this item is installed by a qualified
electrician.
Sheldon Table Lamp
350199
350199
-
2014
-
V1
Sheldon Table Lamp
350199
350199
-
2014
-
V1
