Installation instructions for the MANU automatic out of pool safety cover - 12/12
12
6. Checks
Check the following points relating to standard
NF P 90-308 and check that the cover operates
correctly:
- The cover rolls and unrolls correctly.
- The safety mechanisms are easily handled for
the recommended water levels and are sufficient
(number and position). Check that they are locked on
completion of the installation
- The gaps along the length between the cover blades
and the side of the pool are less than 7 cm and the
cover does not rub "abnormally" on the sides.
- The site is cleaned after installation of the cover and
the packaging and waste is removed.
Product:
MANU
Company:
AS
POOL
Address:
ZAC de la Rouvellière
F-72700 SPAY- LE MANS
Tel:
+33 (0)811 901 331
Fax:
+33 (0)243 479 850
[email protected]
www.abriblue.com
7. Reception of the cover
by the end user
- The installer explains the operation of the ABRIBLUE
cover to the end user and informs him/her of the
safety, usage, maintenance and wintering advice.
- He gives him/her the cover manuals: '"Installation
instruction" and "Safety instructions and instructions
for use of the automatic cover".
- He demonstrates the use of the cover and shows the
functional limits of the cover.
- The installer and end user fi ll in and sign the warranty
document attesting to the compliance of the
installation, the reception of the documents for the
cover and the information given to the end user.
