Front drive drawer fans
In the event of the failure of a front drive drawer fan, replace the drawer front assembly by using the following
procedure:
►
To replace the frond drive drawer fans:
1. Determine which drive drawer contains the failed fan by examining the
ENV
LEDs on the front of each
drawer (see
Front panel
on page 2). A red LED indicates which drawer has the failed fan. The
Home
page
of the graphical user interface (GUI) also tells you which fan has failed (see
Home Page
in
Chapter 3
of
the
Nexsan RAID Storage User Manual
).
2. Unlock the drive drawer (see
Figure 3-5
).
The STAT LED turns amber to let you know that the drive drawer is unlocked.
CAUTION
: Only open ONE drawer at a time. Fully close and lock each drawer before opening
another one. Failure to do so may overbalance the rack, causing equipment damage or injury to
personnel.
3. Carefully slide the drawer all the way out (see
Figure 2-5
).
CAUTION
: Do not lean on or place any heavy object on an open drive drawer. Doing so may
damage the drawer slide mechanism or overbalance the rack.
4. Open the drive drawer lid.
5. Unscrew the retaining screws on either side of the drive drawer.
Figure 3-9: Unscrewing the drawer front assembly retaining screws
Chapter 3: Replacing Modules
Nexsan E60™/Nexsan E48™
FRU Removal and Replacement Guide
Nexsan
www.nexsan.com
28
3