Reseat the expansion controllers
Tip
Remember to check the “left” and “right” labels.
►
To insert the Expansion Controllers into the back of the Nexsan Storage System:
1. Make sure that the Expansion Controller is right side up. The spring lock tab should be on the left (see
)).
2. Insert the Expansion Controller into the slot and carefully slide it back until the spring lock tab clicks into
place.
Figure 3-11: Sliding the Expansion Controller into place
3. Repeat steps 1 and 2 for the second Expansion Controller.
Chapter 3: Installing the Nexsan Storage System
Nexsan E18X and Nexsan E32X
Installation Guide
Nexsan
33
3