4. Attach the rear slide of the left rail to the rack nuts by sliding the large part of the mounting hole over the
rack nut and then pressing outward to seat the nut in the small part of the mounting hole.
Figure 3-5: Attaching the mounting rail in back
5. Repeat the previous step for the front of the mounting rail.
Figure 3-6: Attaching the mounting rail in front
6. Repeat the previous two steps for the right mounting rail.
The mounting rails are now ready to receive the Nexsan Storage System.
Figure 3-7: Both mounting rails in place
Note
The rails may seem “loose” before the Nexsan Storage System is mounted on them. This is normal.
Once the storage system is on the rails, they are held in place by the body of the storage system.
Prepare the mounting rails
30
Part Number: P0450138, Rev. B
Nexsan BEAST™ and E-Series™
3