Nexsan BEAST BT60, Руководство по снятию и замене, Страница: 47 / 57

Rear fans
The fan assemblies at the back of the drive bay can easily be replaced in case of fan failure.
CAUTION : Computer components and disk drives are sensitive to electrostatic discharge (ESD).
Always ground any electrostatic charge from your person before touching components with your
hands or with any tools. Always use an anti-static wrist strap (one ships with each Nexsan Storage
System) while installing or performing maintenance on any Nexsan Storage System. See
Take
proper ESD precautions on page 23 for detailed instructions.
►
To replace a rear fan assembly
1. Unbolt the front of the unit from the rack.
Figure 3-24: Front face bolt locations
PWR ENV DSK STAT
2. Carefully slide the unit for ward on the rails until the side rail latches click into place.
Figure 3-25: Sliding the unit forward
PW
R
EN
V
DS
K
ST
AT
CAUTION : Do not lean on or place any heavy object the unit while it is extended forward.
Doing so may damage the drawer slide mechanism or overbalance the rack.
Rear fans
47 Part Number: P0450132, Rev. B
www.nexsan.com
Nexsan BEAST™ and E-Series™
3