Nexsan BEAST BT60, Руководство по снятию и замене, Страница: 44 / 57

Front fans
Each of the three front fans can be individually replaced in case of failure.
CAUTION : Computer components and disk drives are sensitive to electrostatic discharge (ESD).
Always ground any electrostatic charge from your person before touching components with your
hands or with any tools. Always use an anti-static wrist strap (one ships with each Nexsan Storage
System) while installing or performing maintenance on any Nexsan Storage System. See
Take
proper ESD precautions on page 23 for detailed instructions.
►
To replace a front fan
1. Unbolt the front of the unit from the rack.
Figure 3-18: Front face bolt locations
PWR ENV DSK STAT
2. Carefully slide the unit for ward on the rails until the bolts securing the front panel to the unit are visible.
Figure 3-19: Sliding the unit forward
PW
R
EN
V
DS
K
ST
AT
CAUTION : Do not lean on or place any heavy object the unit while it is extended forward.
Doing so may damage the drawer slide mechanism or overbalance the rack.
Chapter 3: Replacing Modules
Nexsan BEAST BT60 and BT60X
FRU Removal and Replacement Guide Nexsan
www.nexsan.com
44
3