Nexsan BEAST BT60, Руководство по снятию и замене, Страница: 39 / 57

Disk drives
In the event of a disk drive failure, replace the drive using the following procedure.
Note The Spare Mode that the unit is set to determines whether or not newly-inserted disks are
automatically assigned as pool spares. To check or set the spare mode, go to Configure RAID > Spare
Mode in the graphical user interface (GUI). See the Nexsan High-Density Storage User Guide for more
information.
CAUTION : Computer components and disk drives are sensitive to electrostatic discharge (ESD).
Always ground any electrostatic charge from your person before touching components with your
hands or with any tools. Always use an anti-static wrist strap (one ships with each Nexsan Storage
System) while installing or performing maintenance on any Nexsan Storage System. See
Take
proper ESD precautions on page 23 for detailed instructions.
►
To replace disk drives in the unit:
1. Unbolt the front of the unit from the rack.
Figure 3-10: Front face bolt locations
PWR ENV DSK STAT
2. Carefully slide the unit for ward on the rails until the side rail latches click into place.
Figure 3-11: Sliding the unit forward
PW
R
EN
V
DS
K
ST
AT
CAUTION : Do not lean on or place any heavy object the unit while it is extended forward.
Doing so may damage the drawer slide mechanism or overbalance the rack.
Disk drives
39 Part Number: P0450132, Rev. B
www.nexsan.com
Nexsan BEAST™ and E-Series™
3