Nexo FXO-128o, Руководство пользователя

Страница: 50 / 90

4 Configurations on Web Interface
If this parameter is enabled, ‘user=phone’ will be contained in
“From” SIP URI Includes URI. When calls are routed to PSTN network, the called
“user=phone” number will be got from user name. Default value is ‘not
enable’.
INVITE with If this parameter is enabled, “P-Preferred-Identity” header
“P-Preferred-Identity” will be added in INVITE message for anonymous
Header (RFC3325)
call (Support RFC3325).
Value of “Refer To” refers to If this parameter is enabled, ‘contract header’ needs to be
“Contact” filled in in the ‘refer to’ field of a SIP message.
Third Party Do Not Send If this parameter is enabled, the third party will not send 18x
18x Response response during an attended transfer.
Send BYE when Recv If this parameter is enabled, the third party will send BYE to
REFER Response
release session after receiving REFER during a blind transfer.
(Unattended)
Send New REGISTER when If this parameter is enabled, the value of ‘expires’ header will
be automatically updated and REGISTER will be re-sent after
Recv 423 Response
receiving of 423 response.
CSeq Start with 1 If this parameter is enabled, the value of CSeq starts with
‘1’.
Forbid Invalid m=line in If this parameter is enabled, the device will prevent ‘invalid
reINVITE m=line’ from being carried in the SDP of re-INVITE.
SIP Message with ID Header SIP message with ID field, including MAC or SN optional
ID Header Separator Select a separator for the MAC or SN of the ID field
Call Waiting Response Code User can choose 180 or 182 as call waiting response code
RTP Mode in SDP when Call Use ‘send only’ or ‘inactive’ as RTP mode during call holding.
Holding
Support Call Waiting of If this parameter is enabled, the device will support call
Huawei IPPBX waiting of Huawei IPPBX.
Accept Orphan 200 OK If this parameter is enabled, the FXO GW device will support
different ‘to-tag 200 OK’ in an INVITE session.
Called Number Preferred Choose P-Called-Party-ID header or Request-Line
Caller-ID Preferred Choose P-Asserted-Identity header or From Header
Report SDP Whatever If this parameter is enabled, SDP will be reported anytime
18x Response Preferred Choose ‘18x Response with SDP’, ‘Last 18x Response’ or
‘Local Ring Tone Only’
Gateway-128o User Manual 48