1) Posi�on the
Camera Wall Bracket
where you want it and locate
the screw holes in the mount. Mark each hole carefully with a
pencil / pen to ensure that the tapping process is accurate.
2) Set aside the bracket and then drill a hole at least 6.0 mm deep
at each mark. (Drill and drill bits NOT included.)
3) Insert a plas�c wall anchor into each hole and hammer in the
anchors so they are nearly flush with the wall surface. (Hammer
NOT included.)
4) Place the bracket back on the wall in the chosen loca�on and
using the provided screws a�ach the bracket to the wall. Tighten the
screws firmly. Ensure that you do not over-torque or strip the screw
heads.
a. For Corner Moun�ng
b. For Flat Walls
become detached and fall.
● The camera must have an unobstructed view of the crib or bed
from where it is mounted.
●
The camera must have a nearby power outlet that can be reached
without using an extension cord.
When a suitable loca�on has been found that meets these criteria you
may then begin the installa�on process.
- 13 -
