1.
A combination of pipe fittings must be used to connect
the grill to the existing gas line.
The 10 ft (3.0 m) PVC flexible gas supply hose
design certified by CSA must be used.
Pipe-joint compounds suitable for use with Natural
gas must be used. Do not use tape.
There must be a certified manual shut-off valve in
the gas supply line near the grill for easy access.
2. Connect the brass connector on one end of the 10 ft (3.0
m) PVC flexible gas supply hose to the Natural gas
pressure regulator.
3. Connect the quick connector on the other end of the 10
ft (3.0 m) PVC flexible gas supply hose to the rigid
Natural gas supply pipe.
4. Please do leak test after conversion. See page 8.
a) The outdoor cooking gas appliance and its
individual shutoff valve must be disconnected from
the gas supply piping system during any pressure
testing of that system at test pressure in excess of
0.5 psi(3.5KP)
b) The outdoor cooking gas appliance must be
isolated from the gas supply piping system by
closing its individual manual shutoff valve during
any pressure testing of the gas supply piping
Installing the Natural gas regulator
1. Turn off the main gas supply valve.
2. Disconnect 20 lb LP gas fuel tank (if present).
3. Turn off all burner control valves.
4. Remove the 20 lb LP gas fuel tank (if present)
from the grill cart.
5. Use an adjustable wrench to remove the LP
regulator from the manifold.
6. Use an adjustable wrench to install the Natural gas
regulator hose to the manifold and secure. Attach
the natural gas regulator to the side panel inside the
grill cart with the two screws that are preassembled
on the regulator.
Make Gas Connection
Natural Gas Conversion Assembly Instructions
