Main Burners
Control Knob, Label
Component Identification
11
Push In
2
3
Match Light
1.
If the burner will not light after several attempts
then the burner can be match lit. Before using the
match, turn the knobs clockwise to OFF and allow 5
minutes for any accumulated gas to dissipate.
2.
Clip a match on one end of the lighting rod.
3.
Light match.
4.
Hold lighting rod. From under the barbeque, insert
lighted match right next to the burner ports on the
designated burner.
5.
Push in and turn the designated control knob
anticlockwise to .
6.
Burner should ignite immediately.
NOTE: Once lit, burners can be adjusted between
HIGH and LOW settings as desired.
OFF
HIGH
LOW
Push In
2
3
Содержание 720-0786D
Страница 19: ...19 Exploded View ...
