D
Fig.14
Fig.15
2X
Assembly Instructions
8d) Use two 1/4-in. x 15 mm truss head screws
with locking washer (FF) and two 1/4-in. flat
washer (II) to keep the right side burner shelf in
place (these two 1/4-in screws are screwed
through the front and the rear screw holes which
are located on the top of right side burner shelf).
See Fig. 15.
Note:
The
top 2
screws of the firebox should be
screwed from inside to outside for right side
burner shelf. But
bottom 2
screws should be
1X
FF
BB
HH
1X
II
8c) Align the bottom key holes on side burner shelf (D)
with 2 loosened screws on right side panel. Attach the
side burner bowel to the cart with the two loosened
screws on the side panel as shown in Fig.14
Tip: This step is meant to help with the installation but
does not depend solely on the two screws to hold the
weight of the side burner shelf.
9. Left Side Shelf Assembly
Repeat step 8 for the left side shelf (F). Screw
bottle opener on left side shelf.
burner shelf. But
bottom 2
screws should be
tightened from outside to inside.
8e) Use one 5/32-in. x 10 mm truss head screw with
locking washer (BB) and one 5/32-in. flat washer (HH) to
screw the middle screw hole in the top of right side
burner shelf.
Attach right side burner control panel to the main control
panel by using one 5/32-in. x 10 mm truss head screw
with locking washer (BB) and one 5/32-in flat washer
(HH) as shown in
Fig. 15.
Note:
The
top 1
screw of the firebox should be screwed
from inside to outside for right side burner shelf. But
bottom 1
screw should be tightened from outside to
inside.
1X
BB
1X
HH
II
1X
16
