Attach the firebox assembly (A) to the grill cart using
four 1/4-in. x 15 mm truss head screws with locking
washers (CC)
Tighten the battery box with three screws pre-
assembled on the Left Side Panel.
Note:
Two screws with two washers for each side of
cart as shown in Fig. 7
Fig. 7
A
2X
a)
Find the wire connectors from the battery box and
another connectors from LED lights which under
control panel, then plug in with “ + -”
b)
Loosen but do not remove the four screws which
were pre-assembled on the Left Side Panel (G) and
Bottom Panel (B), two screws on cart Right Side
Panel (H) and two on the Bottom Panel (B). Align the
holes of the triangle bracket A (O) with screws on Left
Side Panel (G) and Bottom Panel (B).
Fig.8
Assembly Instructions
CC
6. Door Triangle Bracket Assembly and LED light battery
assembly
Side Panel (G) and Bottom Panel (B).
c)
Tighten the screws previously loosened in step 6b) as
shown in Fig.8
d)
Repeat the steps b) and c) for attaching the triangle
bracket B (P) to the Right Side Panel (H) and Bottom
Panel (B)
e)
Place the battery into the battery box that pre-
assembly in the left side panel according to Plus-n-
Minus, batteries are packed in the manual bag
7. Door Assembly
Attached the door handle (Q) to the each door (C) using
eight 5/32-in. x 10 mm truss head screws with locking
washers (AA) as shown in Fig. 9
8X
Fig.9
16X
AA
14
Q
C
O
