NEXENTRO 57007000, Руководство по эксплуатации

Страница: 2 / 8

Zigbee DALI TW Converter with power supply
– Operation of Zigbee-compliant transmitters or connected push-buttons (normally open
contact)
– Zigbee transmitter for operating Zigbee-compliant devices, e.g. lamps, plug adaptors
– Use in conjunction with Zigbee gateways from different manufacturers
– Mounting in luminaires and false ceilings
4 Product characteristics
– Zigbee-certified product
– DALI DT8 and DALI DT6 luminaires can be operated simultaneously
– Switching on with last saved brightness and colour temperature
– Minimum brightness can be saved permanently
– Electronic short circuit protection
– Electronic over-temperature protection
– Input for connecting a push-button
– Assigning the input to other Zigbee devices via NEXENTRO Config app
– Parameterising via NEXENTRO Config app
– Updating via NEXENTRO Config app
5 Operation
Operation with connected push-button
Switching the light
￭ Press push-button briefly: Light is switched on or off at the last set brightness/colour tem-
perature.
Adjusting the brightness
￭ Long press on the push-button: Adjust the brightness. The dimming direction is changed
with each new long actuation.
Switch light on with minimum brightness
￭ Press push-button continuously with the load switched off: Light switches on at minimum
brightness and gets brighter.
Setting the colour temperature
￭ Press the push-button in the switched-on state twice within 0.4 seconds (double-click).
The device switches to the "Colour temperature" mode.
￭ Long press on push-button. With each new long press, the direction of the color temperat-
ure change changes.
After double-clicking again, or after one minute without operation, the device returns to
normal operation.
Transmitter function
Additional Zigbee lamps or devices for controlling lighting can be connected to the actuator.
This function is set with the NEXENTRO Config app. The devices are then operated in the
same way as the actuator when a push-button is pressed.
Radio operation
The operation is done with Zigbee transmitters or Zigbee gateways that comply with Zigbee
Standard 3.0. The scope of functions and the type of operation depends on the transmitter or
gateway used.
2 / 8
82403710 17.11.2021