Peak 602VL User's Guide
Rev. B0
Dec. 2000
BIOS Setup
4-40
POST (hex)
Description
73h (Optional
Feature).
Enter AWDFLASH.EXE if :
-AWDFLASH is found in Floppy Drive.
-“ALT+F2” is pressed.
74h Reserved.
75h
Detect & install all IDE devices: HDD, LS120, ZIP, CDROM…..
76h Reserved.
77h
Detect Serial ports & Parallel ports.
78h Reserved.
79h Reserved.
7Ah
Detect & install Co-processor.
7Bh Reserved.
7Ch Reserved.
7Dh Reserved.
7Eh Reserved.
7Fh
1. Switch back to text mode if full screen logo is supported.
-If errors occur, report errors & wait for keys.
-If no errors occur or “F1” key is pressed to continue.
2. Clear EPA or customization logo.
80h Reserved.
81h Reserved.
E8POST.ASM starts
82h
1. Call chipset power management hook.
2. Recover the text fond used by EPA logo (not for full screen logo).
3. If password is set, ask for password.
83h
Save all data in stack back to CMOS.
84h
Initialize ISA PnP boot devices.
85h
1. USB final Initialization.
2. NET PC: Build SYSID structure.
3. Switch screen back to text mode.
4. Set up ACPI table at top of memory.
5. Invoke ISA adapter ROMs.
6. Assign IRQs to PCI devices.
