Nexcom Peak 602VL Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 72

background image

Peak 602VL User's Guide

Rev. B0

Dec. 2000

Introduction

1-1

Chapter 1

Introduction

Welcome to the PEAK 602VL the most powerful Intel 815E based single board computer.

The PEAK 602VL Series featured the high performance Intel Celeron / Pentium III CPU and 815E chipset, is

a power packed Half-sized Single Board Computer. The PEAK 602VL Series provides 100/133 MHz FSB

support for Pentium

®

III processors up to 1GHz. The Intel 815E chipset is equipped with internal graphics,

LAN, and support for 2 USB ports, Ultra DMA66/100 IDE interface.

The major features of PEAK 602VL Series are as follows:

1. Intel Pentium III FC-PGA support, 100/ 133 MHz FSB, up to 1+ GHz CPU clock.

2. PC133 SDRAM support up to 256 MB max.

3. On chip 2X AGP VGA with Intel Dynamic Video Memory Technology

4. On chip Ethernet 10/ 100 Mbps, all Intel solutions. Upgradeable to Dual LAN.

5. On Chip enhanced IDE x 1, support Ultra DMA/66/100

6. On Chip 1 USB controllers double the bandwidth to 24Mbps across 2 ports

7. Hardware Monitor for system Voltage, Temperature and FAN speed.

8. Reserved Power header beside IDE connector to support DOM ( DiskOnModule )

9. NEXCOM proprietary PCI connector for various upgrade modules like:

EBK SCSI 2: Support Ultra 2 SCSI

EBK SCSI 160D: Support dual Channel Ultra 160

EBK 160SL : Support one Channel Ultra 160 SCSI and one Intel 82559 LAN.

Not only for the standard SBC application, the PEAK 602VL Series include the on board Power Input
connector, which can also be run as independent system without the backplane installed.    Considering the
placement of PCI extension controller on the SBC under the space limit, we design the on board NEXCOM
proprietary PCI Interface that allows the upgrade module to be mounted.    The optional EBK SCSI 2 / EBK
SCSI 160D / EBK 160SL module designed with Adaptec AIC-7890 Ultra 2 SCSI / AIC-7899 Dual Channel
SCSI 160 / AIC-7892 SCSI 160 + Intel 82559 LAN controller, enhances PEAK 602VL Series a featured-rich
single board computer.

The PEAK 602VL Series series is suitable for the standard Half-Size SBC application with ISAMAX up to 20

ISA devices and embedded system and special applications required the small size Form Factor and

supports for the Linux, Windows 2000, Windows NT Operation system.

«
...
4
5
6
7
8
...
»

Содержание Peak 602VL









































































Отзывы:

Нет отзывов

Похожие инструкции для Peak 602VL

Бренд: Biostar Страницы: 72

Бренд: Gigabyte Страницы: 44

Бренд: Freescale Semiconductor Страницы: 28

Бренд: A-Trend Страницы: 60

Motherboard DJ800

Бренд: IWILL Страницы: 52

Бренд: Zamel Страницы: 2

Бренд: EVGA Страницы: 14

BrillianX 1S/2000

Бренд: QDI Страницы: 63

Бренд: Analog Devices Страницы: 6

Бренд: Evinrude Страницы: 76

Бренд: Microsemi Страницы: 22

Бренд: Texas Instruments Страницы: 26

Бренд: CHAINTECH Страницы: 49

Бренд: TESSERA Страницы: 31

Бренд: JETWAY Страницы: 55

Бренд: TRIGEM Страницы: 17

Бренд: Microchip Technology Страницы: 54

Бренд: Gigabyte Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды