Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
32
NDiS B537 Series User Manual
Chapter 4: BIOS Setup
S5 RTC Wake Settings
This section is used to configure system to wake from S5 using RTC alarm.
Exit
Advanced
Chipset
PCIPnP
Security
Main
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable System wake
on alarm event. Select
FixedTime, system will wake on
the hr::min::sec specified.
Select DynamicTime , System
will wake on the current time
+ Increase minute(s)
Wake system from S5
[Disabled]
Wake System from S5
Enables or disables system wake on alarm event. When FixedTime is selected,
system will wake on the hr::min::sec specified. When DynamicTime is
selected, system will wake on the current time + Increase minute(s).
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable CSM Support.
Compatibility Support Module Configuration
CSM Support
CSM16 Module Version
Boot option filter
Option ROM execution
Network
Video
[Enabled]
07.80
[UEFI only]
[Do not launch]
[UEFI]
CSM Configuration
This section is used to configure the compatibility support module features.
CSM Support
Enables or disables Compatibility Support Module (CSM).
Boot Option Filter
This option filters which devices system can boot to.
Network
Enables or disables the boot option for legacy network devices.
