Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
13
NDiS B537 Series User Manual
Chapter 3: System Setup
Installing a SO-DIMM Memory Module
2. Push the module down until the clips on both sides of the socket lock
into position. You will hear a distinctive “click” sound, indicating the
module is correctly locked into position.
1. Insert the module into the socket at an approximately 30 degrees angle.
Apply firm even pressure to each end of the module until it slips into the
socket. The gold-plated connector on the edge of the module will almost
completely disappear inside the socket.
Memory module
