* USE ONLY THE SILICONE LUBRICANT SUPPLIED
5
Install the spring washer and M16 nut on to the threaded stud.
6
Use torque wrench with a socket wrench 22 and tighten exerting
50
Nm (5 kgm or 36,9 foot-pounds) of torque.
In order to achieve the correct applied torque ensure that there is no lubricant on the threaded
parts.
22mm
22mm
22 mm
socket
1/2" - 12,7 mm
torque wrench
L ≥ 90 mm
extension
50 Nm
30 Nm
1/2" - 12,7 mm
torque wrench
22 mm
socket
basic
insulating
plug
lubricate
1
Clean and lubricate* the insulating plug for the opposite side of the connector.
2
Insert the plug in the connector and tighten assembly : use torque wrench with socket of 22 and tighten exerting
30
Nm (3 kgm or 22,1 foot-pounds) of torque.
In order to achieve the correct applied torque ensure that there is no lubricant on the threaded
parts.
M16 nut
spring
washer
INSTALLATION OF THE BASIC INSULATING PLUG
IS91374-ENG - 489TB/G
-45/S - Revision 1
Page 8 of 9
!
FOR INFORM
ATION ONL
Y
Please alw
ay
s use the instruc
tions supplied in the k
it
!
