CA
Remove the vertical stabilizer from the fuselage.
Using the sharp hobby knife, carefully cut away the
covering
inside
the lines
which were marked above.
Be cautious
not to cut into the wood
, this will
weaken the structure
.
When you are satisfied with the alignment, use a pencil
to trace around the right and left of the stabilizer where
the vertical stabilizer meet the fuselage.
CA
Use a small glue faucet, Apply the thin CA glue on
the vertical stabilizer where it contacts the fuselage.
! Securely glue together. If coming off during fly,
you lose control of your air plane.
Thin CA
! Securely glue together. If coming off during fly,
you lose control of your air plane.
Note:
make sure the elevator move freely without binding.
13- Vertical stabilizer
continued
