CA
11- Horizontal stabilizer
continued
12- Vertical stabilizer
Use a small glue faucet, Apply the thin CA glue on
the horizontal stabilizer where it contacts the fuselage
(both the top and bottom sides)
,and into the slot of the
fuselage as show.
Remove the horizontal stabilizer from the fuselage.
Using the sharp hobby knife, carefully cut away the
covering
inside
the lines
which were marked above.
Be cautious
not to cut into the wood
, this will
weaken the structure
.
Cut away only the
covering inside the line.
Full the rudder out of the
stabilizer.
