NTSecureGateway
11 / 14
User Manual
11648_0008_0012_UM-User_Manual
Revision: DV A1
NewTec GmbH · Buchenweg 3 · 89284 Pfaffenhofen a.d. Roth · Germany · Tel.: +49 7302 9611-0 · [email protected] · www.newtec.de
F9
05
Interfaces
For Location of the interfaces see Figure 2: External Interfaces
Power Supply
Mating Connector: Phoenix Contact, Part No: 1836079
Pin Number
Description
1
GND
2
24V
Ethernet 1
10BASE-T and 100BASE-TX Ethernet connector
Support for 24V passive Power over Ethernet (POE)
Ethernet 2
10BASE-T and 100BASE-TX Ethernet connector
CAN Bus / Digital Out
Depending on mounting option this connector is used for CAN Bus or for digital output
CAN Bus:
Pin Number
Description
1
GND
2
CAN Hi
3
CAN Lo
Digital Output:
Pin Number
Description
1
GND
2
5V or 24V (mounting option)
3
Switched GND
USB Host
USB-A connector for USB 2.0
RS 485 / Analog
Depending on mounting option, this connector is used for RS485, 4-20mA or 0-10V interface
RS485:
Pin Number
Description
1
GND
2
RS485 A
3
RS485 B
Analog Input:
Pin Number
Description
1
GND
2
Analog In
3
N/A
