Newport FPM-8220, Руководство пользователя

Страница: 59 / 84

April 2018 47 FPM-8220
*SRE?
Common
Service Request Enable Query Device Dependent
Front Panel
Action Returns the enabled bits in the Service Request Enable Register.
Parameters None.
Notes The response is the sum of the enabled bits and must be a value between 0 and 255.
Refer to Figure 3.5 in Chapter 3 for a complete description of the Status Byte and Service Request
Enable Register.
Examples “*SRE?” –response: “136” specifies that the device condition summary and error available bits are
enabled.
*STB?
Common
Status Byte Query Device Dependent
Front Panel
Action Returns the value of the Status Byte Register.
Parameters None.
Notes The response is the sum of the enabled bits and must be a value between 0 and 255.
Refer to Figure 3.5 in Chapter 3 for a complete description of the Status Byte and Service Request
Enable Register.
Examples “*STB?” –response: “200” specifies that the device condition summary, master status summary and
error available bits are enabled.
*TST?
Common
Self Test Device Dependent
Front Panel
Action Performs an internal self-test, then reports results.
Parameters None.
Notes Response 0 = test completed with no errors.
Response non-zero = test not completed or completed with errors.
Examples “*TST?” –response: “0” means test completed without errors.
*WAI Common
Wait to Continue Device Dependent
Front Panel
Action Prevents the instrument from executing any further commands until OPC (operation complete) status
is true.
Parameters None.
Notes This command can be used to make the instrument wait until an operation is complete before
continuing.
Care should be taken to set the GPIB time-out appropriately for use with the *WAI command. After
this command (or the Delay) command is sent, the instrument may receive up to 20 more commands
before the wait period is over.
Examples “*WAI” –action: wait until OPC status is true.